Re: [oletrucks] throttle cable

["DS1 KRUCAS CS/CD 7259" <krucasdb@boxer.navy.mil>]

When I repaired mine on my first '57 about 20 years ago, I cut back 
the sheath that had been mangled by the carburetor bracket about 
an inch. Then I pulled the inner wire out and cut it off flush with the 
end of the rod shaft. I drilled out the old wire with a 1/16" bit in a 
1/4" drill, superglued the new wire in and cut it to length. I may 
have to do my vent cables that way on my present truck.
Dave '57 short step in San Diego
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959