Greg, if you haven't sent your gauge yet to Palo Alto, you might consider
Nisonger in NY. I've heard good and bad stories about both places. I had
both my speedos for the MGA and MGB repaired and recalibrated by Nisonger.
They take between 6 to 8 weeks to return the gauge, so they aren't quick but
they work well. I had a problem with the trip meter on the one speedo gauge
and returned it and it was corrected at no extra cost. They charge around
$170.
Andy
-----Original Message-----
From: nobbc-bounces@autox.team.net [mailto:nobbc-bounces@autox.team.net] On
Behalf Of Greg Badano
Sent: Thursday, March 25, 2010 7:08 AM
To: North Bay British Car Club
Subject: Re: [Nobbc] Abnormally high oil pressure
Thanks Rich. That helps a lot.
Best,
Greg
--- On Wed, 3/24/10, rlmossholder@comcast.net <rlmossholder@comcast.net>
wrote:
From: rlmossholder@comcast.net <rlmossholder@comcast.net>
Subject: Re: [Nobbc] Abnormally high oil pressure
To: "North Bay British Car Club" <nobbc@autox.team.net>
Date: Wednesday, March 24, 2010, 9:35 PM
Greg,
I used a brass "T" fitting in the blockB to connect both gauges. It should
be
a simple brass NPT fitting. They are readily available at any hardware
store.
IB found it at ACE. I also used teflon pipe tape on the threads to prevent
any
leaks.
Cheers,
Rich
B
_______________________________________________
Nobbc mailing list
Nobbc@autox.team.net
http://autox.team.net/mailman/listinfo/nobbc
_______________________________________________
Nobbc mailing list
Nobbc@autox.team.net
http://autox.team.net/mailman/listinfo/nobbc
_______________________________________________
Nobbc mailing list
Nobbc@autox.team.net
http://autox.team.net/mailman/listinfo/nobbc
|