Thanks Rich. That helps a lot.
Best,
Greg
--- On Wed, 3/24/10, rlmossholder@comcast.net <rlmossholder@comcast.net>
wrote:
From: rlmossholder@comcast.net <rlmossholder@comcast.net>
Subject: Re: [Nobbc] Abnormally high oil pressure
To: "North Bay British Car Club" <nobbc@autox.team.net>
Date: Wednesday, March 24, 2010, 9:35 PM
Greg,
I used a brass "T" fitting in the blockB to connect both gauges. It should be
a simple brass NPT fitting. They are readily available at any hardware store.
IB found it at ACE. I also used teflon pipe tape on the threads to prevent
any
leaks.
Cheers,
Rich
B
_______________________________________________
Nobbc mailing list
Nobbc@autox.team.net
http://autox.team.net/mailman/listinfo/nobbc
_______________________________________________
Nobbc mailing list
Nobbc@autox.team.net
http://autox.team.net/mailman/listinfo/nobbc
|