mgs
[Top] [All Lists]

Re: [Mgs] Replacing clutch flex line

To: "Craig Straub" <craigstraub@sbcglobal.net>
Subject: Re: [Mgs] Replacing clutch flex line
From: Paul Osborne <paul@ece.rochester.edu>
Date: Wed, 30 Dec 2009 09:29:43 -0500
Craig, working from under the car, loosen the hose from the slave 
cylinder first . unbolt the slave from the side of the transmission, 
now remove the hose from the slave. unbolt the hose from the body 
fitting . Installation is the rev
except you need to bleed the system last.
paul

>Hi Group,
>
>I have to replace my clutch flex lineon my 1973 MG and  I have 
>misplaced my workshop manual.
>
>Can anyone give me any suggestions on how to remove it?
>
>Thanks,
>
>Craig
>_______________________________________________
>
>Support Team.Net  http://www.team.net/donate.html
>
>Mgs@autox.team.net
>http://autox.team.net/mailman/listinfo/mgs
>
>http://www.team.net/archive


-- 
Paul Osborne
University of Rochester
Engineering & Technical Services
Department of Electrical and Computer Engineering
201 Hopeman Bldg River Campus
Rochester, New York 14627
585-275-5226
paul@ece.rochester.edu

_______________________________________________

Support Team.Net  http://www.team.net/donate.html

Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>