Of course you can, but because the OD trans is shorter, you need to have a
1 1/8" spacer block machined up to go between the diff and rear driveshaft
flange. Use grade 8 bolts, please.
Bill
In a message dated 21/12/2009 1:33:27 A.M. Pacific Standard Time,
roger@rogerlos.com writes:
Can I really not use the driveshaft from my non O/D 5-main, 3-syncro
gearbox
when I do the O/D conversion?
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|