The body bracket, the large 'C'-bracket, and the two rubber 'cotton reels'
that join them are the same. The two-part bracket that clamps on to the
tail pipe is different between twin carb and dual carb models (although the
4-cylinder single carb item is the same as the twin-carb V8, funnily
enough). Don't forget the C-bracket is handed, there is a slight set in one
direction so it sits square to the angle of the tail-pipe.
PaulH.
----- Original Message -----
> Does anyone know if the rear exhaust bracket (the part that mounts to the
body) from a 74-80 B will fit a 73 B?
|