Is this still a problem when removing a non- OD tranny?
Monte
----- Original Message -----
From: "Charles & Peggy Robinson" <ccrobins@ktc.com>
To: <Jethogger@aol.com>
Cc: <mgs@autox.team.net>
Sent: Saturday, February 14, 2004 9:20 AM
Subject: Re: MGB Over Drive Removal Help
> Hi John,
>
> The best way I've found is to make sure everything is clean and there
> are no burred threads on any fastener or hole. I do up the bolts on
> the tranny first. There's no tension on them that way.
>
> Cheers,
>
> CR
>
>
> Jethogger@aol.com wrote:
> > Hello All. Does anyone know a simple way to remove the OD Tranny rubber
> > mounts. There are four 5/16 short bolts that hold the cross member to
the tranny.
> > Two can be remove with a suable socket. But the other two are a bear to
> > remove. And ever hard to reinstall. I have install many tranny. But
these over
> > drives suck and take me a lot of time. To install two of the bolts. Any
tricks
> > of the trade here. Thanks John, Flintstone, GA
|