Hi John,
The best way I've found is to make sure everything is clean and there
are no burred threads on any fastener or hole. I do up the bolts on
the tranny first. There's no tension on them that way.
Cheers,
CR
Jethogger@aol.com wrote:
> Hello All. Does anyone know a simple way to remove the OD Tranny rubber
> mounts. There are four 5/16 short bolts that hold the cross member to the
>tranny.
> Two can be remove with a suable socket. But the other two are a bear to
> remove. And ever hard to reinstall. I have install many tranny. But these
>over
> drives suck and take me a lot of time. To install two of the bolts. Any
>tricks
> of the trade here. Thanks John, Flintstone, GA
>
> *
|