Re: SU rebuild ok, need a little advice

["Telewest \(PH\)" <paul.hunt1@blueyonder.co.uk>]

More likely a linkage or butterfly alignment problem.  You should be able to
stall the engine with the idle screws, manifold leak or no.

----- Original Message -----
From: "Marc" <smarc@abs.net>
To: <mgs@autox.team.net>
Sent: Monday, January 27, 2003 1:23 AM
Subject: RE: SU rebuild ok, need a little advice


> Interesting, but probably have a vacuum leak on the 80 cause I could not
get
> the idle to slow down to below about 1200 - 1500 rpm.

///  or try http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive