If you put a plastic bag under the clutch MC cap and screw it back on,
it will slow the fluid loss down considerably. Kind of like holding
water in a straw by holding your thumb on the top.
Skye
Word on the street is JApple2154@aol.com said:
> Hello listers------------was under my '71B project cleaning the contacts on
> the starter---hoping to find out why the starter will not spin and I noticed
> the or a DPO installed a new slave cylinder and did not (as usual I
> understand) remove the bleed screw and replace it to the side but put the
> hydrolic line in the bleed hole etc----------my question to correct this, how
> much fluid will I lose-----will it be only a few drops-----or will I lose
> most of the fluid?-------------not a big deal either way just thinking do I
> need a rag to catch the spill or a pan?------my clutch has always engaged
> near the foor------I hope this will help the clutch action---------thanks
> again Apple
--
1966 MGB - GHN3L Safety Fast! __,__\__
The MGB Experience www.mgbexperience.com (_o____o_)
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|