You also might find a 2nd hand GT backplate...
Cheers,
Hans
----- Original Message -----
From: <williem@mindspring.com>
To: Larry Hoy <larryhoy@marketvalue.net>
Cc: MG list <mgs@autox.team.net>
Sent: Friday, June 28, 2002 5:14 PM
Subject: Re: GT real brake cylinders
> I think you are correct. If I remember correctly, there is a difference
in
> addition to the bore size. There is a pin on the backside of the cylinder
> that fits into to a hole on the backplate. These are at different
locations
> on the roadster than on the GT (so you have to modify the location of the
hole
> to match the cylinder if you use a gt cylinder on a roadster brake
system). I
> am doing this from memory so you need to check it out, but you should be
able
> to place a hole in the appropriate place to match the cylinder you plan to
> use.
>
> Bill
> '74 BGT
>
>
> On Fri, 28 Jun 2002 08:48:17 -0600 Larry Hoy <larryhoy@marketvalue.net>
wrote:
>
>
> I would like to verify something.
>
> If the rear brake cylinders on a roadster are replaced with the larger
> bore brake cylinders from the GT ........
>
> Larry Hoy
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|