The voltage stabiliser is usually a rectangular box about 1" long with two
terminals labelled B (battery, green)and I (instruments, light-green/green)
and an adjustment screw One or both of the terminals may have two spades
rather than just one. It needs to be screwed to the firewall i.e. ground to
function correctly, the gauges fed from it will read high if not.
----- Original Message -----
From: "John Shidler" <allfacts@bellsouth.net>
To: "MG List" <mgs@autox.team.net>
Sent: Sunday, January 13, 2002 6:50 PM
Subject: Help Identifying Electrical Componets
> When I purchased my 68 B a month ago none of my guagues or instruments
were
> working including the dash lights.
>
> I have been trying to trace back all the circuits but I have not been able
to
> identify several of the componets. Sopecifically, the Control Box (2), and
the
> Voltage Stabilizer (64).
>
> I am thinking that the VC is the small round plastic thingee that is
dangling
> by 2 wires (one green the other green/red) under the dash on the passenger
> side. This doesn't quite jive with my circuit diagram.
///
/// mgs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
///
|