I've never had mine repaired, but I think that I would feel more
comfortable with someone who has done it before. The sills are very
important...
On Wed, 14 Mar 2001 21:58:03 -0500, Dan Hackney wrote:
>Questions: How should I investigate the need to repair the sills? The
>metal seems solid when knocked on, and the car has been garaged for a number
>of years. However, if I put a floor jack under one corner the body will
>audibly creak and stress (I also noticed this while turning sharply back
>when the car was assembled). Also, the floorpans have rusted a bit and I
>thought the sills were usually the first to go.
>Is it a bad idea to let someone who has never performed the operation before
>tear into our car if it is necessary?
>Apologies for the long wind and bandwidth, but this is not something you
>want to make a mistake on.
>-Dan
>1972 MGB
>
--
Andrew Lundgren
lundgren@byu.net
http://www.itwest.net/~lundgren
///
/// mgs@autox.team.net mailing list
/// (If they are dupes, this trailer may also catch them.)
|