Actually, the rubber grommet does work pretty well, but after losing it
while trying to remove the plug so I could short across it and get the fans
to run, I decided to wire it down with tie wire! Feel much better now!
Bill
----- Original Message -----
From: "Mike Razor" <mrazor@mis.net>
To: <mgs@autox.team.net>
Sent: Tuesday, July 25, 2000 6:42 PM
Subject: New Question, MGB Raditor
> Car was running hot and I popped the hood and touched the little
> sensor unit that goes into the top tank on the radiator. It popped
> out and fluid spewed forth, until I stuck it back in. It has black
> goop holding it in. I drove the car home, it ran good and cool, the
> little sensor worked and did not come out know and the fans kick on as
> they should. What gives with the gizmo popping out, is there a bracket
> that holds it in?
> Next question. The tank that has the filler cap on it was about half
> full, I did not fill it all the way up, thinking that it is only half
> full in anticipation of overflow, is that tank suppose to be only half
> full?
> THANKS!
> MIKE R
>
|