Hi ya Frank!
My HS4 over flows headed right down the to the ground. There are rubber
adaptors that connect to the overflow lines, then to metal lines, then down
past the exhaust system to the ground. There is also a small metal mount that
bolts them to the side of the engine. The mount is attached to one of the oil
pain bolts. My engine and SUs are out of the car right now. I can get a
picture of the overflow lines so you can see them if you like.
Andrew
On Sat, 10 Jun 2000 frank.walker@insurquote.com wrote:
> hello list people, my 76 B when I got it had the zenith stromburg carb that
> it was supposed to have and after fighting with the one on my sons midget I
> have decided to try the SU's when I bought a parts car it came with 2 sets
> of SU and everything one pair was even polished. and when I bought my head
> it came with another pair. all of the throttle shafts have no. play now for
> my question where do the overflow tubes go do they just go away from the
> exhaust manifold and dump on the ground or what? Oh and my solution to the
> air filter clearance problem is to build a aluminum air box for the carb
> inlets and use a hose to connect it to a remote air filter from a fuel
> injected firebird out in front of the radiator giving the engine a cold
> air source.
>
>
|