Re: Caliper Rebuild Frustration *#@$*

mgs

Re: Caliper Rebuild Frustration #@$

To:	skye@ffwd.bc.ca
Subject:	Re: Caliper Rebuild Frustration #@$
From:	REasterby@aol.com
Date:	Wed, 14 Oct 1998 21:42:12 EDT

Find someone that has a 3/4 drive socket that matches the diameter of the
seal. Square the seal on the caliper & tap the socket/seal with a mallet. The
main point is to keep everything straight and tap it into place. I also lube
the surface with brake fluid/red rubber brake grease. Good Luck
Ray Easterby
72 BGT origown
88Xj40

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
Caliper Rebuild Frustration #@$, Skye Poier Re: Caliper Rebuild Frustration #@$, Kevin Sullivan RE: Caliper Rebuild Frustration #@$, Unger, Larry G Re: Caliper Rebuild Frustration #@$, Rick Morrison Re: Caliper Rebuild Frustration #@$, REasterby <= Re: Caliper Rebuild Frustration #@$, Nory Re: Caliper Rebuild Frustration #@$, Mark Snowdon Re: Caliper Rebuild Frustration #@$, Skye Poier Re: Caliper Rebuild Frustration #@$, Rich Mason Re: Caliper Rebuild Frustration #@$, Rick Morrison Re: Caliper Rebuild Frustration #@$, Mark Snowdon

Previous by Date:	Re: Kingpins revisited, REasterby
Next by Date:	Think before you write, Carl W. French
Previous by Thread:	Re: Caliper Rebuild Frustration #@$, Rick Morrison
Next by Thread:	Re: Caliper Rebuild Frustration #@$, Nory
Indexes:	[Date] [Thread] [Top] [All Lists]