Get a crows foot wrench, it will only take a few minutes to get
the hose off.
...Art
On Mon, 12 Oct 1998, john peloquin wrote:
> Dear netters:
>
> This weekend, I replaced my Brake MC, and while I was at it, I thought I
> would replace the clutch hose between the metal line from the clutch MC to
> the slave cylinder. Well, wouldn't you know that you couldn't fit a wrench
> (at least none of the Craftsman wrenches) I have into the space available
> to loosen the nut to replace the hose. The fitting to the metal line line
> is much like that to the flex lines for the brakes, except bigger and
> unapproachable due to "steric hindrance" from the starter solenoid!
>
> Anyone out there with a suggestions- besides pulling the starter?
>
> Is this a dreaded "Special Service Tool" situation?
>
> Thanks much!
>
> "Never ascribe to Malice that which can be explained by Ignorance."
> John J. Peloquin, Assistant Research Entomologist
> Entomology, University of California, Riverside, CA 92521
>
>
|