RE: Oil, Oil Everywhere, and not a drop to...73 B

[Dan Pockrus <dpockrus@efficient.com>]

> Question #2: Does anyone know of a more common car that will 
> cross over
> nicely for use on a B head? The reason the gasket warped to 
> the inside is
> that it seemed to be a fraction too large. It was ordered 
> from Moss. In my
> neck of the woods, no shop carries gaskets for a '73 B. But 
> it seems to be a
> pretty average size. I suppose I could make my own.

        I had the same problem with Moss valve cover gaskets. I cut
about 1" out of mine and used some Permatex Aviation seal to glue it to
the valve cover. Haven't driven far enough to see if it's going to work
yet.

Dan Pockrus
'74 CBB