Try this website for various British tools and hardware. I believe they
have what you're looking for.
http://www.britishfasteners.com/mm5/merchant.mvc
John Quilter
Brisbane, California
----- Original Message -----
From: "Ed Woods" <fogbro1@comcast.net>
To: "Bob Grunau" <grunau.garage@sympatico.ca>; "Dave and Liz DuBois"
<ddubois@sinclair.net>
Cc: "MG-T" <mg-t@autox.team.net>
Sent: Wednesday, July 08, 2009 1:28 PM
Subject: Re: [Mg-t] questions
> Bob, Dave and all,
>
> Thanks for the info. I am very uncomfortable with the Wood "XPAG Engine"
> values. Took the 10mm to 35 lbs and the 8mm to 25.
>
> While I'm asking questions, does anyone know a source for 6 point
> BSF/Whitworth sockets and combo wrenches? All my stuff is 12 point.
>
> Thanks again,
>
> Ed Woods
>
> P.S. I'm still using the original type oil filter and was able to get one
at
> Advance Auto. Had to order it, but it took only a day.
>
> EW
> ----- Original Message -----
> From: "Bob Grunau" <grunau.garage@sympatico.ca>
> To: "Dave and Liz DuBois" <ddubois@sinclair.net>; "Ed Woods"
> <fogbro1@comcast.net>
> Cc: "MG-T" <mg-t@autox.team.net>
> Sent: Wednesday, July 08, 2009 2:01 PM
> Subject: RE: [Mg-t] questions
>
>
> > Dave and Ed,
> > Dave, in general I agree with your torque table values, EXCEPT for the
> > rocker stand bolts. I like to use 25 ft-lbs ( you show 19 ft-lbs ) for
> > the
> > 8 mm bolts and 35 ft-lbs ( you show 43 ft-lbs ) for the 10 mm bolts. I
> > have
> > broken 10 mm bolts trying to use 43 ft-lbs . I know Woody Woods in the
> > XPAG
> > Engine book shows 29 ft-lbs for 8 mm and 43 ft-lbs for 10 mm but I feel
> > these numbers are too high.
> > Bob Grunau
> > Canada
> >
> > -----Original Message-----
> > From: mg-t-bounces@autox.team.net [mailto:mg-t-bounces@autox.team.net]On
> > Behalf Of Dave and Liz DuBois
> > Sent: Wednesday, July 08, 2009 12:38 PM
> > To: Ed Woods
> > Cc: MG-T
> > Subject: Re: [Mg-t] questions
> >
> >
> > Ed,
> >
> > For information on torque for various fasteners in the XPAG/XPEG engines
> > see the list, Torque Values for TD and TF Fasteners in the Other Tech
> > Articles on my web site at: http://homepages.donobi.net/sufuelpumps/
> >
> > Cheers,
> > Dave
> > _______________________________________________
> >
> > Support Team.Net http://www.team.net/donate.html
> >
> > Mg-t@autox.team.net
> > http://autox.team.net/mailman/listinfo/mg-t
> >
> > Archives at http://www.team.net/archive
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> Mg-t@autox.team.net
> http://autox.team.net/mailman/listinfo/mg-t
>
> Archives at http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mg-t@autox.team.net
http://autox.team.net/mailman/listinfo/mg-t
Archives at http://www.team.net/archive
|