Dave and Ed,
Dave, in general I agree with your torque table values, EXCEPT for the
rocker stand bolts. I like to use 25 ft-lbs ( you show 19 ft-lbs ) for the
8 mm bolts and 35 ft-lbs ( you show 43 ft-lbs ) for the 10 mm bolts. I have
broken 10 mm bolts trying to use 43 ft-lbs . I know Woody Woods in the XPAG
Engine book shows 29 ft-lbs for 8 mm and 43 ft-lbs for 10 mm but I feel
these numbers are too high.
Bob Grunau
Canada
-----Original Message-----
From: mg-t-bounces@autox.team.net [mailto:mg-t-bounces@autox.team.net]On
Behalf Of Dave and Liz DuBois
Sent: Wednesday, July 08, 2009 12:38 PM
To: Ed Woods
Cc: MG-T
Subject: Re: [Mg-t] questions
Ed,
For information on torque for various fasteners in the XPAG/XPEG engines
see the list, Torque Values for TD and TF Fasteners in the Other Tech
Articles on my web site at: http://homepages.donobi.net/sufuelpumps/
Cheers,
Dave
Mg-t@autox.team.net
http://autox.team.net/mailman/listinfo/mg-t
Archives at http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mg-t@autox.team.net
http://autox.team.net/mailman/listinfo/mg-t
Archives at http://www.team.net/archive
|