If you got the Moss one it gives you instructions on how to wire it in
without making any changes to a stock wiring harness.
I had to modify mine when I added turn signals, so here goes from memory...
If it's not the Moss one it's a pretty simple operation and you wire it into
the purple/green wire that runs from the switch to the driver side rear
light. Furthermore if you trace this wire back from the light you come to a
connection box, (looks like a rolled up piece of elec tape) where on one
side you have a purple/green wire running from the switch and on the other
you have two purple/greens one going to the driver's side and the other the
pass. On the side where the switch goes in there's an empty plug to plug
the third light in with a bullet connector. After that you just need to
find a ground.
Hope this helps?
Scott
On 2/9/06, Richard Taylor <rgt3000@fuse.net> wrote:
> I have a TD that has had the turn signals added. Where is the best place
> to
> wire in the 3rd brake light? I got this as a Christmas gift and want to
> wire this so it works only with the brake lights. I have added the relay
> as
> per previous threads. Installing as per the instructions, it flashes with
> which ever light it is added to. Can someone provide a wiring diagram to
> add the wiring from the switch?
>
> Thanks
>
> Rick
> 51 MG TD
> Cincinnati
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-t
|