Another thought: Thinking back to a recent article about putting a relay
into the brake electrics to take some of the load off the switch, by any
chance did you replace your brake bulbs with higher ampere bulbs during the
resto? Maybe fried the contacts with too much load?
Wayne Francis
Ojai, CA
PS. I'm planning to install that relay.
-----Original Message-----
From: owner-mg-t@autox.team.net [mailto:owner-mg-t@autox.team.net] On Behalf
Of Bud Krueger
Sent: Thursday, February 09, 2006 6:22 AM
To: Scott Allen
Cc: mg-t@autox.team.net
Subject: Re: Next Problem...
Scott,
One little thing that tends to get overlooked -- the brake light line is
only powered when the ignition switch is on. It's one of the green
wires attached to terminal A4 of the fuse block. Others are the
screenwiper, petrol warning light and turn signals.
Bud Krueger
a/k/a admin@ttalk.info
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-t
|