I had a similar situation on my TC. It ended up that the float bowl lid
developed a hairline crack. Check carefully as to the source of the leak.
Good luck!
----- Original Message -----
From: <BobMGT@aol.com>
To: <mg-t@autox.team.net>
Sent: Tuesday, May 30, 2000 10:54 PM
Subject: TD Carburetor Leak
> Both of the banjo fittings are leaking on my TD after a carburetor
rebuild.
> The proper fiber washers are installed and the banjo bolts are well
> tightened. Is there a fix for this? Would a very thin coating of Permatex
#2
> on the washers be beneficial?
>
> Bob Donahue (Still stuck in the '50s)
> EMAIL - BOBMGT@AOL.COM
> 52 MGTD - under DIY restoration NEMGTR #11470
> 71 MGB - AMGBA #96-12029, NAMGBR #7-3336
>
|