John,
If you don't want to sacrifice a disk to make the jig, Moon will loan
you one for a refundable deposit.
Jim in Palmdale
> Pretty close John.... basically what I did was cut a 1 and a half inch
slot
> just below the hole that the dzus button goes in... about 3 inches long...
> then I set the tabs on the disc... so what you have is three tabs mounted
> to a disc with the metal exposed where it touches the rim.... then I
tacked
> the tabs on the wheels and took off the disc and did the final welding....
> in my case on my wheels I set it up so that the tab had to be bent 1/4 of
> an inch and that allowed a bit more welding surface on the rim....
>
> Works great... never had an issue... and I don't have to mess with those
> nasty little screws...
>
> You will love it...
>
> K
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/land-speed
|