Great, thanks a lot. I'm even gonna do the Pig push truck with "Moon's"
now. got another related question now, should I rebalance the wheels?
At 07:28 AM 5/6/02, you wrote:
>Pretty close John.... basically what I did was cut a 1 and a half inch slot
>just below the hole that the dzus button goes in... about 3 inches long...
>then I set the tabs on the disc... so what you have is three tabs mounted
>to a disc with the metal exposed where it touches the rim.... then I tacked
>the tabs on the wheels and took off the disc and did the final welding....
> in my case on my wheels I set it up so that the tab had to be bent 1/4 of
>an inch and that allowed a bit more welding surface on the rim....
>
>Works great... never had an issue... and I don't have to mess with those
>nasty little screws...
>
>You will love it...
>
>K
John Robinson, Mechanician
Mechanical Engineering University of Wisconsin
1513 University Ave.
Madison, Wi. 53706
608-262-3606
FAX 608-265-2316
Current World Land Speed Record Holder
Bonneville Salt Flats
H/GCC 92 cu.in. 1980 Dodge Colt
131.333 MPH set 1995
136.666 MPH set 1996
140.292 MPH set 2000
144.396 MPH set 2000
MPS-PG 441 c.c. 1967 BSA Victor Motorcycle
95.193 MPH set 2001
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/land-speed
|