John
Let us know what you fins out about that filter.
Rich
John Beckett wrote:
> Chris
>
> I was in Muscle Motorsports the other day and noticed that the Winston Cup
> cars use a large spin on filter (I think from a diesel engine). Don't know
> anything about flow rates, but would assume it's OK for any dry sump. Expect
> to go back in two weeks and will get some prices if your interested.
>
> John Beckett
> ----- Original Message -----
> From: "Chris R Harris" <yesford@clear.net.nz>
> To: "land-speed" <land-speed@autox.team.net>
> Sent: Monday, November 20, 2000 10:50 PM
> Subject: Dry sump pumps
>
> > Need a little help and advice Team !
> >
> > Setting up the dry sump pump ( Peterson 4 stage with -16 AN inlet line
> from
> > tank ) on my new motor, can someone tell me the approx flow rate through
> the
> > pressure stage at 7500 engine rpm with the pump at 50% of that speed. I
> need
> > this info to correctly order a remote filter to be inserted in the
> single -16
> > AN line returning scavenged oil to the tank. Those available through
> > speedshops have -12 AN fittings at best. There are plenty of industrial
> and/or
> > truck units available for oil with the bigger fittings, but need the
> approx
> > flow rate to get it right.
> >
> > Chris Harris New Zealand.
|