Chris
I was in Muscle Motorsports the other day and noticed that the Winston Cup
cars use a large spin on filter (I think from a diesel engine). Don't know
anything about flow rates, but would assume it's OK for any dry sump. Expect
to go back in two weeks and will get some prices if your interested.
John Beckett
----- Original Message -----
From: "Chris R Harris" <yesford@clear.net.nz>
To: "land-speed" <land-speed@autox.team.net>
Sent: Monday, November 20, 2000 10:50 PM
Subject: Dry sump pumps
> Need a little help and advice Team !
>
> Setting up the dry sump pump ( Peterson 4 stage with -16 AN inlet line
from
> tank ) on my new motor, can someone tell me the approx flow rate through
the
> pressure stage at 7500 engine rpm with the pump at 50% of that speed. I
need
> this info to correctly order a remote filter to be inserted in the
single -16
> AN line returning scavenged oil to the tank. Those available through
> speedshops have -12 AN fittings at best. There are plenty of industrial
and/or
> truck units available for oil with the bigger fittings, but need the
approx
> flow rate to get it right.
>
> Chris Harris New Zealand.
|