Don't think the 200mph pass will happen in June at Maxton.... but maybe
better then we have done before... looking for High 180's.... on the
smallest hp Nitrous system we can run just to Prove the system.... Most
likely a 4th gear only Pass... It's Just to close to Muroc to hurt it....
We are talking going back to the C Motor for Both the Sept and Oct Meets and
Running up the Hp on the Nitrous till it gets there or runs over the Crank.
Basically Trying to get Brad into the Two Club with the ECTA....
This of course is assuming that I don't run over the Crank at Muroc!
Keith
----- Original Message -----
From: John Beckett <landspeedracer@email.msn.com>
To: Keith Turk <kturk@ala.net>; <land-speed@autox.team.net>
Sent: Friday, May 26, 2000 7:30 AM
Subject: Re: C motor and Nitrous....Hmmm
> 200 MPH on nitrous???
>
> ----- Original Message -----
> From: "Keith Turk" <kturk@ala.net>
> To: "John Beckett" <landspeedracer@email.msn.com>;
> <land-speed@autox.team.net>
> Sent: Thursday, May 25, 2000 10:49 PM
> Subject: Re: C motor and Nitrous....Hmmm
>
>
> > We are coming to Maxton before Muroc....
> >
> > Hoping to test the motor just Prior to Maxton....
> >
> > K
> > ----- Original Message -----
> > From: John Beckett <landspeedracer@email.msn.com>
> > To: Keith Turk <kturk@ala.net>; <land-speed@autox.team.net>
> > Sent: Thursday, May 25, 2000 8:45 PM
> > Subject: Re: C motor and Nitrous....Hmmm
> >
> >
> > > To bad you cant try it out at Maxton before you head to Muroc.
> > >
> > > JB
> > > ----- Original Message -----
> > > From: "Keith Turk" <kturk@ala.net>
> > > To: "John Beckett" <landspeedracer@email.msn.com>;
> > > <land-speed@autox.team.net>
> > > Sent: Wednesday, May 24, 2000 10:27 PM
> > > Subject: C motor and Nitrous....Hmmm
> > >
> > >
> > > > We were supposed to get some Complimentary stuff from a Very popular
> > > company
> > > > as a result of the Hot Rod Deal.... well that whole Package set up
> fell
> > > > through yesterday... Bummer it was a 2k system..... so we are now
> > looking
> > > at
> > > > other options.... Think I got it all nailed down today....
> > > >
> > > > Talked to my Engine Management specialist... ( thanks for the free
> > > consult
> > > > Dave) and we are looking at a couple of options....He likes a single
> > > Nitrous
> > > > system brought in Early.... just after Peak torque....Starting with
a
> > 50hp
> > > > kit and working up from there.... (ease of tuning Vs the Dual stage
> > > > system )
> > > >
> > > > The C Motor was missing as a result of some fouled Plugs... nothing
> > more..
> > > > we took the motor out and apart and it's finally not hurt.... Just
> > > polishing
> > > > the Crank and rolling a new set of bearings in and a couple of other
> > > Machine
> > > > shop operations....( lifter galley oil drain back restrictors) and
> > > Blending
> > > > the block where it meets the head to get rid of the shelf....
> > > >
> > > > Other then that we are opening up the rings a tick to handle the
> > > Nitrous....
> > > >
> > > > Should be on the Dyno within the next two weeks.... I am like you
> > John....
> > > > looking forward to seeing the real numbers....
> > > >
> > > > One of the other things that bothers us is the Fuel flow to the
> > system...
> > > so
> > > > I am going to get a bigger Fuel Filter and get rid of the sexy lines
> and
> > > go
> > > > with FAT lines to the Carb... This might cure the top end lean out
> > > > problem....
> > > >
> > > > Lots to do and NO TIME.... Perfect.. I love Pressure.... Keith
> > > > ----- Original Message -----
> > > > From: John Beckett <landspeedracer@email.msn.com>
> > > > To: Keith Turk <kturk@ala.net>; <land-speed@autox.team.net>
> > > > Sent: Wednesday, May 24, 2000 7:55 PM
> > > > Subject: Questions
> > > >
> > > >
> > > > > Keith
> > > > >
> > > > > Have you sorted out the miss in the "C" motor when you were on the
> > Dyno?
> > > > > When will you take it back for a full test at 7,000+ RPM. Have you
> > > > received
> > > > > your nitrous system yet? Anxious to hear what it does on the dyno.
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Keith Turk" <kturk@ala.net>
> > > > > To: <land-speed@autox.team.net>
> > > > > Sent: Wednesday, May 24, 2000 6:59 PM
> > > > > Subject: Air Ride Tech
> > > > >
> > > > >
> > > > > > Well I have ordered some parts today to change the air ride
> > around
> > > a
> > > > > > bit....
> > > > > >
> > > > > > up to this point the front and rear have been combined
systems....
> > in
> > > > > other
> > > > > > words I could only change the front bags or the rear as a
unit....
> > > what
> > > > I
> > > > > > have coming is a single controller that I am going to put on the
> > Front
> > > > > > system and I am going to seperate the two rear bags so that I
can
> > Jack
> > > > > > weight into the car left to right on the rear end.... Don't
> really
> > > plan
> > > > > on
> > > > > > changing the basic set up much but I thought I would share the
> > > Change...
> > > > > >
> > > > > > I am also still trying to figure out how to capture the
Pressures
> > ....
> > > > as
> > > > > > the increase in pressure on the gage represents downforce on the
> > > car...
> > > > > >
> > > > > > Keith ( ain't these little Post notes neat .... noticed Ole Dan
> was
> > > > > getting
> > > > > > the hang of it)
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > >
> > >
> > >
> > >
> >
>
>
>
>
|