--===============0902697364293764763==
--0000000000004ae24a05ce8f7f2c
"Cogged or synchronous" belts are a totally different kettle of fish.
They are commonly called "timing belts".
They run on a flat pulley with teeth that engage with the teeth on the belt.
Think cam belts.
M
On Sun., Oct. 17, 2021, 1:04 p.m. Bob Spidell, <bspidell@comcast.net> wrote:
> This doc--from the government, so it HAS to be true ;)--claims cogged, or
> 'synchronous,' are most efficient:
>
> https://www.nrel.gov/docs/fy13osti/56012.pdf
>
> Now I have to deal with smooth/standard, cogged, and 'notched' (what's the
> diff?).
>
> bs
>
> On 10/17/2021 8:13 AM, Michael Salter wrote:
>
> As I recall the original belt for a 100 is a Ferodo V161.
> I have been using a B-45 Gates belts which sit a little lower in the
> pulley but don't contact the bottom of the pulley groove.
> https://www.biedlers-belts.com/gates-b45-belt.html
>
> M
>
>
> On Sun., Oct. 17, 2021, 10:16 a.m. David P via Healeys, <
> healeys@autox.team.net> wrote:
>
>> Gates belts has a belt for industrial equipment (non automotive) that is
>> an excellent copy of the original. Unfortunately I don't remember the part
>> number.. (gets worse with age). I found it googling their web pages.. B1
>> kinda rings a bell.. happy hunting. DP
>> On 10/17/2021 8:01 AM, Bob Spidell wrote:
>>
>> I'm going to return it, with '8x10 colored glossy photographs.'
>>
>>
>> On 10/17/2021 6:43 AM, warthodson@aol.com wrote:
>>
>> Bob,
>> The way the vendors find out about an issue is if the customer tells
>> them. You should forward your message to Moss.
>> Gary Hodson
>>
>>
>> -----Original Message-----
>> From: Bob Spidell <bspidell@comcast.net> <bspidell@comcast.net>
>> To: Healeys <healeys@autox.team.net> <healeys@autox.team.net>
>> Sent: Sat, Oct 16, 2021 7:52 pm
>> Subject: [Healeys] BN2 Fan Belt
>>
>> I finally got around to fixing my loose water pump pulley and installing
>> a new fan belt. I ordered a 'cogged' belt from Moss--part#
>> 021-966--thinking it might work better than the original slab of rubber. I
>> noticed before installing that it was narrower than the original type that
>> I'd had, which had rotted, but it looked like it would work. Once I started
>> tensioning it however, it was clear it *might *work, but sat too low in
>> the pulleys, and was essentially riding on the bottom of the pulley grooves
>> instead of on the sides (and the angle of the sides of the belt was
>> incorrect). Anyone else tried one of these?
>>
>> I'm shocked, SHOCKED I TELL YA', that a vendor would sell something that
>> could possibly work, but isn't truly correct.
>>
>> bs
>>
>>
>>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
--0000000000004ae24a05ce8f7f2c
Content-Transfer-Encoding: quoted-printable
<div dir=3D"auto">"Cogged or synchronous" belts are a totally dif=
ferent kettle of fish.<div dir=3D"auto">They are commonly called "timi=
ng belts".</div><div dir=3D"auto">They run on a flat pulley with teeth=
that engage with the teeth on the belt.</div><div dir=3D"auto">Think cam b=
elts.</div><div dir=3D"auto"><br></div><div dir=3D"auto">M</div></div><br><=
div class=3D"gmail_quote"><div dir=3D"ltr" class=3D"gmail_attr">On Sun., Oc=
t. 17, 2021, 1:04 p.m. Bob Spidell, <<a href=3D"mailto:bspidell@comcast.=
net">bspidell@comcast.net</a>> wrote:<br></div><blockquote class=3D"gmai=
l_quote" style=3D"margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left=
:1ex">
=20
=20
=20
<div>
This doc--from the government, so it HAS to be true ;)--claims
cogged, or 'synchronous,' are most efficient:<br>
<br>
<a href=3D"https://www.nrel.gov/docs/fy13osti/56012.pdf" target=3D"_bla=
nk" rel=3D"noreferrer">https://www.nrel.gov/docs/fy13osti/56012.pdf</a><br>
<br>
Now I have to deal with smooth/standard, cogged, and 'notched'
(what's the diff?).<br>
<br>
bs<br>
<br>
<div>On 10/17/2021 8:13 AM, Michael Salter
wrote:<br>
</div>
<blockquote type=3D"cite">
=20
<div dir=3D"auto">As I recall the original belt for a 100 is a
Ferodo V161.
<div dir=3D"auto">=C2=A0I have been using a B-45 Gates belts which =
sit
a little lower in the pulley but don't contact the bottom of
the pulley groove.</div>
<div dir=3D"auto"><a href=3D"https://www.biedlers-belts.com/gates-b=
45-belt.html" target=3D"_blank" rel=3D"noreferrer">https://www.biedlers-bel=
ts.com/gates-b45-belt.html</a><br>
</div>
<div dir=3D"auto"><br>
</div>
<div dir=3D"auto">M</div>
<div dir=3D"auto"><br>
</div>
</div>
<br>
<div class=3D"gmail_quote">
<div dir=3D"ltr" class=3D"gmail_attr">On Sun., Oct. 17, 2021, 10:16
a.m. David P via Healeys, <<a href=3D"mailto:healeys@autox.tea=
m.net" rel=3D"noreferrer noreferrer" target=3D"_blank">healeys@autox.team.n=
et</a>>
wrote:<br>
</div>
<blockquote class=3D"gmail_quote" style=3D"margin:0 0 0 .8ex;border=
-left:1px #ccc solid;padding-left:1ex">
<div>
<p>Gates belts has a belt for industrial equipment (non
automotive) that is an excellent copy of the original.
Unfortunately I don't remember the part number.. (gets
worse with age). I found it googling their web pages.. B1
kinda rings a bell.. happy hunting.=C2=A0 DP <br>
</p>
<div>On 10/17/2021 8:01 AM, Bob Spidell wrote:<br>
</div>
<blockquote type=3D"cite"> I'm going to return it, with =
9;8x10
colored glossy photographs.'<br>
<br>
<br>
<div>On 10/17/2021 6:43 AM, <a href=3D"mailto:warthodson@aol.=
com" rel=3D"noreferrer
noreferrer noreferrer" target=3D"_blank">warthodson@aol.c=
om</a>
wrote:<br>
</div>
<blockquote type=3D"cite">
<div style=3D"color:black;font:12pt Comic Sans MS,sans-seri=
f">Bob,
<div>The way the vendors find out about an issue is if
the customer tells them.=C2=A0 You should forward your
message to Moss.</div>
<div>Gary Hodson<br>
<br>
<br>
<div style=3D"font-family:arial,helvetica;font-size:10p=
t;color:black"><font size=3D"2">-----Original Message-----<br>
From: Bob Spidell <a href=3D"mailto:bspidell@comcas=
t.net" rel=3D"noreferrer noreferrer noreferrer" target=3D"_blank"><bspid=
ell@comcast.net></a><br>
To: Healeys <a href=3D"mailto:healeys@autox.team.ne=
t" rel=3D"noreferrer noreferrer noreferrer" target=3D"_blank"><healeys@a=
utox.team.net></a><br>
Sent: Sat, Oct 16, 2021 7:52 pm<br>
Subject: [Healeys] BN2 Fan Belt<br>
<br>
<div id=3D"m_3694614700323836781m_-8497860751573058=
673m_2714273202460204982yiv8575284951">
<div> I finally got around to fixing my loose
water pump pulley and installing a new fan
belt. I ordered a 'cogged' belt from
Moss--part# 021-966--thinking it might work
better than the original slab of rubber. I
noticed before installing that it was
narrower than the original type that I'd
had, which had rotted, but it looked like it
would work. Once I started tensioning it
however, it was clear it <i>might </i>work,
but sat too low in the pulleys, and was
essentially riding on the bottom of the
pulley grooves instead of on the sides (and
the angle of the sides of the belt was
incorrect). Anyone else tried one of these?<br>
<br>
I'm shocked, SHOCKED I TELL YA', that a
vendor would sell something that could
possibly work, but isn't truly correct.<br>
<br>
bs<br>
</div>
</div>
</font><br>
</div>
</div>
</div>
</blockquote>
<br>
</blockquote>
</div>
</blockquote>
</div>
</blockquote>
<br>
</div>
_______________________________________________<br>
rer noreferrer" target=3D"_blank">http://www.team.net/donate.html</a><br>
<br>
Archive: <a href=3D"http://www.team.net/pipermail/healeys" rel=3D"noreferre=
r noreferrer" target=3D"_blank">http://www.team.net/pipermail/healeys</a> <=
a href=3D"http://autox.team.net/archive" rel=3D"noreferrer noreferrer" targ=
et=3D"_blank">http://autox.team.net/archive</a><br>
<br>
<a href=3D"mailto:Healeys@autox.team.net" target=3D"_blank" rel=3D"noreferr=
er">Healeys@autox.team.net</a><br>
<a href=3D"http://autox.team.net/mailman/listinfo/healeys" rel=3D"noreferre=
r noreferrer" target=3D"_blank">http://autox.team.net/mailman/listinfo/heal=
eys</a><br>
<br>
s/michaelsalter@gmail.com" rel=3D"noreferrer noreferrer" target=3D"_blank">=
http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com</a><b=
r>
<br>
</blockquote></div>
--0000000000004ae24a05ce8f7f2c--
--===============0902697364293764763==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
--===============0902697364293764763==--
|