I just pulled mine out of a steering box I am rebuilding, and yes there are 6
positioned as such: ()()() Where only the outer edges touch. The dimensions
are as follows:
ID: 1-1/16
OD: 1-1/2
Pictures of the measurements are attached for verification purposes.
The washers were loose on the shaft, but I think the closer tolerance is going
to be on the OD side.
Olin K. Brimberry, PE
Principal Engineer
obrimberry at hunterbane.com
Office - 919.803.4274
Mobile - 919.522.1608
HunterBane Engineering, PLLC
PO Box 10314
Raleigh, NC 27605
3306 Alamance Drive
Raleigh, NC 27609
-----Original Message-----
From: Bob Spidell [mailto:bspidell at comcast.net]
Sent: Monday, January 9, 2017 5:48 PM
To: Healeys <healeys at autox.team.net>
Subject: [Healeys] Belleville washers in BN2 steering box
The Moss catalog calls for 6 'belleville' washers under the rocker shaft in the
late BN, early BN4/6 steering box (Moss part# 725-115). Mine doesn't appear to
have ever had them; anyone know if they're required?
I'm guessing yes, because otherwise the rocker shaft looks like it rests on a
rough surface but, they list for $12.79/ea, and if they're not necessary--or if
anyone knows of a cheaper alternative--I'd prefer not to spend that much.
TIA,
Bob
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_8714.jpg
Type: image/jpeg
Size: 1194232 bytes
Desc: not available
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170110/7bf28e80/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_8713.jpg
Type: image/jpeg
Size: 1093806 bytes
Desc: not available
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170110/7bf28e80/attachment-0003.jpg>
|
