I need to check something. With the 100-4, there are the BN1 front fenders,
and the BN2 front fenders. The easiest (only?) way to tell them apart is to
measure the distance from the top of the wheel opening to the top of the
fender. Here is the Austin Healey service note about it.
http://www.acmefluid.com.au/larry/a421.jpg
It notes that the measured distance for the BN1 is 9 1/2 inches, and 9 inches
for the BN2. I would SWEAR it was 11 inches for the BN1 and 9 inches for the
BN2. I just seem to have this strongly in my memory. Am I wrong? I would
assume that the Healey service note is correct, but, dang! :)
- Paul B.
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|
