Hi Patton,
You dont have to take this too seriously. I mounted theese pumps
horizontaly, verticaly and in varios angles and no problem, they work.
In our rally car we use two of theese in back tilted vertical(ish)
position. One facing up, one upside down. They work.
Gergo
2013/2/10 John Rowe <jkrowe46@bigpond.net.au>
> Patton
> I have been informed that these pumps should be mounted horizontal (ie with
> the base on the bottom).I use one of these as a spare (second) pump and
> made
> up an angle bracket to mount to original position.
> Cheers
> John Rowe Qld Aust
> BN1 BT7
>
> -----Original Message-----
> From: healeys-bounces@autox.team.net [mailto:
> healeys-bounces@autox.team.net]
> On Behalf Of Patton Dickson
> Sent: Monday, 11 February 2013 7:43 AM
> To: Healey List
> Subject: [Healeys] Facet pump installation question
>
> I have a facet pump I am installing in the my BN4. The instructions say
> the
> pump should be mounted at 45B0 from the tank.
>
> Am I reading that correctly that the pump angle from the input coming from
> just above the shock, And the output should be toward the jumpseat?
>
> To do this I will have to drill a hole in the existing bracket to allow for
> the angle and I don't want to mess this up.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/pajtamuvek@gmail.com
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|