Patton
I have been informed that these pumps should be mounted horizontal (ie with
the base on the bottom).I use one of these as a spare (second) pump and made
up an angle bracket to mount to original position.
Cheers
John Rowe Qld Aust
BN1 BT7
-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of Patton Dickson
Sent: Monday, 11 February 2013 7:43 AM
To: Healey List
Subject: [Healeys] Facet pump installation question
I have a facet pump I am installing in the my BN4. The instructions say the
pump should be mounted at 45B0 from the tank.
Am I reading that correctly that the pump angle from the input coming from
just above the shock, And the output should be toward the jumpseat?
To do this I will have to drill a hole in the existing bracket to allow for
the angle and I don't want to mess this up.
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|