Hi Patton,
I used 2 of those pumps (1 as reserve) on AHX12 and found that when
mounted horizontally 1 would not supply sufficient fuel for
prolonged full throttle.
I installed a switch to turn the reserve pump on at about 3/4 throttle
which resolved the problem.
However after I reoriented the pumps as per those instructions the
single pump would supply sufficient fuel at full throttle!!
Don't have an explanation; just my experiance.
Michael S
On 2013-02-11, at 10:48 AM, Patton Dickson <57healey@gmail.com> wrote:
> I have a facet pump I am installing in the my BN4. The instructions say the
> pump should be mounted at 45B0 from the tank.
>
> Am I reading that correctly that the pump angle from the input coming from
> just above the shock, And the output should be toward the jumpseat?
>
> To do this I will have to drill a hole in the existing bracket to allow for
> the angle and I don't want to mess this up.
>
> Here is a pic of the instructions
> http://i.imgur.com/PugJ2iv.jpg
>
> http://i.imgur.com/BVrFwzI.jpg
> Here is what the pump looks like mocked up in place.
>
> Thanks
>
> Patton Dickson
> Plano, TX
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|
