The distance piece also makes the stub axle stronger. It should
absolutely not be allowed to turn with the wheel, and it should also not
be omitted when assembling the front wheel hub.
Per in Sweden
WILLIAM B LAWRENCE skrev 2012-05-11 06:40:
The distance piece and shims do not need to be greased and should not turn on
the stub axle. they bear on the inner bearing races and are pinched between
them. Their purpose is to allow the bearings to be set as close to zero
clearance as possible without introducing any preloading.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/mharc@autox.team.net
|