Hi all
I am having trouble starting the car (BN1 July 54). I noticed that when I
pulled the choke out the jet leaver on the front carburetor does not appear to
move much. I disconnected the choke cable to the carbs and manually moved the
Jet levers on both carbs. The rear carb leaver moves very freely and has a nice
smooth action while the front carb leaver is tight and it takes a lot more
effort to move. I removed the air filter on the front carb and moved the piston
with my finger and it had a nice smooth movement so I am guessing nothing is
binding inside the carb.B B Is the front jet leaver normally tight. If not what
should I look at.
Thanks
B EoinB
B
Sent from my Android phone so All I Can Say Is It Made Sense Before It Left My
Phone
|