The distance piece and shims do not need to be greased and should not turn on
the stub axle. they bear on the inner bearing races and are pinched between
them. Their purpose is to allow the bearings to be set as close to zero
clearance as possible without introducing any preloading.
Bill Lawrence
> Date: Thu, 10 May 2012 20:54:59 -0400
> From: ah3000me at gmail.com
> To: healeys at autox.team.net
> Subject: Re: [Healeys] for those really interested inBN1 Detail
>
> Hi,
>
> I'm starting to reassemble my front BJ8 hubs. Should the distance piece be
> greased or go in dry? Does it turn on the spindle?
>
> thanks,
>
> Tom
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/ynotink at msn.com
|