John,
When I restored the valve cover to my Bugeye back in 1999, I found a
company in Los Angles called Hanson Rivet. The have EVERY kind if rivet. The
problem is that they like to sell large quantities of rivets. The salesman
there got me around that by telling me if I bought the rivet bucking tool (it
was relatively cheap) he could include 100 or so samples of one or more
sizes. They were a perfect replacement for the tubular aluminum rivets used
on valve covers.
http://www.hansonrivet.com/
Mike MacLean
56 BN2
60 AN5
--- On Sun, 1/29/12, john spaur <jmsdarch@sbcglobal.net> wrote:
From: john spaur <jmsdarch@sbcglobal.net>
Subject: [Healeys] Rivet
To: healeys@autox.team.net
Date: Sunday, January 29, 2012, 12:50 AM
The field coil connector (the lucar connector poking thought the drive end
plate that the two field coils connects to) is held on by a rivet with a 1/8"
diameter.
Does anyone know where to get this rivet? It is a flat head tubular rivet 1/8"
x 9/16" or 5/8" I believe.
Thanks in advance,
John Spaur
3000 MKII
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/rrengineer.mike@att.net
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|