The field coil connector (the lucar connector poking thought the
drive end plate that the two field coils connects to) is held on by a
rivet with a 1/8" diameter.
Does anyone know where to get this rivet? It is a flat head tubular
rivet 1/8" x 9/16" or 5/8" I believe.
Thanks in advance,
John Spaur
3000 MKII
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|