healeys
[Top] [All Lists]

[Healeys] Fan Belt issues

Subject: [Healeys] Fan Belt issues
From: eyera3000 at gmail.com (I Erbs)
Date: Tue, 5 Jul 2011 21:23:41 -0700
References: <CACPMnYro2jv2mhzahFZmCbm3mz8RgV6EZQqBctUa6qKxTk2_Yw@mail.gmail.com> <0FEAF9BEA66B884B8B9DAA4C7135CE603254A4A754@MAIL1.ua-net.ua.edu>
I asked at both my local napa and autozone stores and they said no to size .
Will try another store on Thursday

Ira Erbs
IT Consultant
Portland, OR

sent from my Droid, please excuse typos and random self corrections because
my phone has It's own ideas about what word I meant to write

On Jul 5, 2011 8:13 PM, "Williams, Allen" <awill at ccs.ua.edu> wrote:
> Here's my two cents worth on that problem. Go to a parts store like NAPA
or Autozone and tell them the size belt you think you need. They can tell
the length by the stock #. If they 'll give refunds, buy two or three sizes
in half inch gradations. Take back the ones that don't fit. That's what I
did.
> Regards
>
> ________________________________________
> From: healeys-bounces at autox.team.net [healeys-bounces at autox.team.net] On
Behalf Of I Erbs [eyera3000 at gmail.com]
> Sent: Tuesday, July 05, 2011 9:36 PM
> To: Ahealey help
> Subject: [Healeys] Fan Belt issues
>
> I measured the length of wire around my pulley, water pump and generator
> and it was 41".
> The wire sat in the bottom of the V, so a Fan belt might be a bit shorter
> 7440, 9440 GATES belts are too short, as is the one sold by Moss.
> My old one was cut off and tossed, I now know that was a bad idea :(
> any ideas?
>
> --
> Ira Erbs
> Portland, OR
> _______ _______
> (______ \____1960 BT7____/ _______)
> (_________________________)
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/awill at ccs.ua.edu

<Prev in Thread] Current Thread [Next in Thread>