Re: [Healeys] BT7 windscreen frame

[WILLIAM B LAWRENCE <ynotink@msn.com>]

While he purists need not comment, they probably will anyway. For my pat I
would like a picture...

Bill Lawrence

> Date: Thu, 17 Mar 2011 08:50:32 -0400
> From: michael.oritt@gmail.com
> To: jkrowe46@bigpond.net.au
> CC: healeys@autox.team.net
> Subject: Re: [Healeys] BT7 windscreen frame
>
> John--
>
> I did just that on my 100.  Rather than using solid steel I used very
> lightweight 1 x 19 stainless steel cable  with fittings that you can
> purchase at a good marine supply and swedge on with tools they have on
hand.
>  I used a toggle fitting at the top and attached it in place of the buffer
> plate.  The bottom end of the cable ends in a threaded terminal which I
pass
> through a small hole in the scuttle just behind the mirror, then tighten
> everything down via a thumbscrew so that the top seals absolutely tight at
> speed.
>
> Purists need not comment.
>
> Best--Michael Oritt
>
> I had thought of running a stainless steel threaded rod from the centre of
> > the top frame to dashboard (as MGB??)
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/ynotink@msn.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums