In the strict sense of judging, if something is known and stated and
observed to be incorrect for the serial number and point in time of
production, there should be a deduction appropriate to the severity and
frequency of the error. However, as Curt stated it may not be observed
therefore may not be deducted. Keep in mind there are a lot of little things
that won't be seen due to the fact that judging takes place with the car on
the ground, and in a practical sense, if we can't see it, we can't deduct
for it.
I would take issue with the fuel line clip vs. the P clip. The fuel line
clip can be tricky to install but really holds well and keeps the line well
out of harm's way. The method I find works best is to snap the clip over the
line and then start the shank into the hole. Gently tap the ends of the clip
until it snaps into the hole. Originals go in beautifully this way, but some
repros can suddenly break off. Prepare to break about 1 in 5 of the repros.
Rich
-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of warthodson@aol.com
Sent: Monday, January 17, 2011 10:07 AM
To: Editorgary@aol.com; healeys@autox.team.net
Subject: Re: [Healeys] Fuel Line Clips
But another judge might not give a pass. What is a person to do? Is it
common
practice in concours for judges to "give passes" based upon personal
preferences?
Gary Hodson
Personally, as a concours judge, I'd give you a pass on
hat arrangement, since the original clips really to put the fuel line, and
ou, in jeopardy.
Gary
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/richchrysler@quickclic.net
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|