The Moss catalog shows the 'hairpin' style clips for BT7s up to car# 17351, and
P-style clips thereafter.
I got the hairpin style clips for our BN2 from Moss, but they weren't correct
(same problem you noted, plus they were
too 'wimpy' for lack of a better term). BCS has better ones, but they ain't
cheap (about $4 each).
I wouldn't be surprised if, when Austin changed to the P-clip, they left the
holes for the hairpin clips.
bs
On 1/15/2011 7:38 PM, john spaur wrote:
> I recently purchased some fuel line clips that are similar to the brake line
> clips.
>
> When I tried to install the clips and fuel line I found that they do not
> really work with a 5/16" line; they seem to
> be for a smaller line but I know they are not for the brake lines because
> that is an even smaller clip.
>
> My fuel line had clips and screws like the ones for the wiring harness when I
> took it out.
>
> What a people doing for fuel line clips? Do I need a different clip?
> Could it be that the frame rail holes are two small for the clip? My rail
> holes are 13/64" but could be a little
> larger due to paint interference.
>
> Thanks for any help!
> John Spaur
> '62 BT7
> _______________________________________________
>
>
--
*******************************************************************
Bob Spidell San Jose, CA bspidell at comcast.net
*******************************************************************
|