Hi Dave,
I copied you on this email because I bought the clips from BCS.
Do you know what diameter the snap-in-clip needs for the hole?
Thank you,
John
At 07:38 PM 1/15/2011 -0800, john spaur wrote:
>I recently purchased some fuel line clips that are similar to the
>brake line clips.
>
>When I tried to install the clips and fuel line I found that they do
>not really work with a 5/16" line; they seem to be for a smaller
>line but I know they are not for the brake lines because that is an
>even smaller clip.
>
>My fuel line had clips and screws like the ones for the wiring
>harness when I took it out.
>
>What a people doing for fuel line clips? Do I need a different clip?
>Could it be that the frame rail holes are two small for the clip? My
>rail holes are 13/64" but could be a little larger due to paint interference.
>
>Thanks for any help!
>John Spaur
>'62 BT7
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|