Many thanks Dave!
Does anyone have a photo of the plate?
Best, tadek
-----Original Message-----
From: Dave Porter [mailto:frogeye@porterscustom.com]
Subject: RE: [Healeys] Distributor on the 100 engine
There is a thick ~3/16" plate with countersunk holes (3 I think) that
centralize the dist.
dave
-----Original Message-----
From: Tadeusz Malkiewicz [mailto:tadeusz.malkiewicz@plusnet.pl]
Subject: RE: [Healeys] Distributor on the 100 engine
Dave,
What face place??.. I have the clamp, but it goes above those 5mm..
Best, tadek
-----Original Message-----
From: Dave Porter [mailto:frogeye@porterscustom.com]
Subject: RE: [Healeys] Distributor on the 100 engine
Looks like, by the time you add the face plate and the clamp it should be
pretty close.
-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
Subject: [Healeys] Distributor on the 100 engine
A small question here..:
My engine is finally painted with the gearbox painted and I tried to mount
the distributor, but is does not want to sit all the way in. There is about
5mm gap:
http://picasaweb.google.pl/Volvo1800S/HealeyEngine#5515356135052686962
or http://tinyurl.com/2v9xrtc
Anyone has any idea what the problem is?
It was rebuild by Advanced Distributors.
Tadek
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|