> From: Robert Blair <rnbmail@yahoo.com>
> Subject: Re: [Healeys] rear crank seal
> To: "john doe" <rccpl1@yahoo.com>
> Date: Thursday, April 8, 2010, 9:14 AM
> JD, There is no 'normal crank seal'
> at the rear end of the BJ8 crank. It is a reverse
> thread on the crank that 'rewinds to oil' back in when the
> crank is rotating. When the crank is stationary, the
> thread contents will tend drip out. If you have a
> gush, it is more likely the front gearbox oil seal that will
> also flow out the bell housing bottom.
>
> Check things carefully before committing to a crank out
> job.
>
> Robert N. Blair Yellow 65BJ8 rnbmail@yahoo.com
>
>
>
>
> --- On Thu, 4/8/10, john doe <rccpl1@yahoo.com>
> wrote:
>
> > From: john doe <rccpl1@yahoo.com>
> > Subject: [Healeys] rear crank seal
> > To: Healeys@autox.team.net
> > Date: Thursday, April 8, 2010, 3:05 AM
> > For some reason now the rear is
> > leaking like a sive who sells the best one not a
> project
> > that i want to do twice its for a bj8
> > _______________________________________________
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|