Site updated this morning with the new information.
John Sims, BN6
Aberdeen, NJ
http://www.healey6.com
-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of Alex
Sent: Thursday, April 08, 2010 9:59 AM
To: Mark LaPierre
Cc: Healeys@Autox.Team.Net
Subject: Re: [Healeys] Hey Alex
Hi Mark,
Look here for some details and photos, thanks to John Sims and his great web
site (sorry about the poor quality of the images. I should have taken more
and better photos).
http://www.healey6.com/Technical/OD%20Relay%20Repairs.pdf
Anyway, as for using your voltmeter, set it to read for -12V. Put the common
lead of your meter on the chassis. Put the other lead on terminal C2.
Turn on the ignition switch (don't start the motor). Turn on the O/D switch
(A on diagram).
You should read about -12V on your meter. That shows that the relay coil is
energized and the internal relay contacts (at C1 and C2) have closed.
Put the gear lever in 3rd or 4th gear. If you move the gear lever into first
or second you should hear the big solenoid (F) drop out with a click. I also
hear the solenoid click in when I move the gear lever in 3rd and 4th. With
the engine off you can hear this distinctly.
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|