Charlie,
You wrote: How are the two holes used?
One hole must accept the T-shaped end. Whats the other one for?
These straps, originally made by John Bull, were made for the motocycle
industry to secure cables (brake, clutch, throttle, valve lifter, magneto
advance, choke) to the frame. In thecase of the bikes, the proper
installation is to wrap the strap around the cable and pass the "t" and
through the first hole and pull it tight so the strap is secured tightly
around the cable. The strap is then fastened around the motorcycle frame
and the "t" passed through the second hole to secure it. The application
in the HEaley is totally different. Also, I do not think this was done on
all 3000's, just the earlier ones.
Mirek
60 BT7
56 BSA Road Rocket
67 Velocette Venom
39 Velocette KSS
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as m.g.sharp@sympatico.ca
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|