Perfect.
Everything I needed to know.
Thanks to Norman, Mark, Gary and Scott
Charlie
On Apr 4, 2008, at 5:29 PM, Mark and Kathy wrote:
If you haven't caught this yet. Our Healey Guru himself was nice
enough to add an
"actual size" picture of this strap in his Tech Talk manual. And this
can easily be
made from an old inner tube that I'm sure we all have one or two in the
garage.
Page 114, and it even has a picture of where it goes.
Well done Norm, Thanks.
Mark
----- Original Message ----- From: "Charlie Frazer"
<cfrazer@jcomm.uoregon.edu>
To: <healeys@autox.team.net>
Sent: Friday, April 04, 2008 12:51 AM
Subject: [Healeys] Short rubber strap
> According to the originality guidelines, the 3000 cars had an
> odd-shaped, 4 rubber strap used to secure the capillary tube to either
> the heater hose or to the breather hose between the engine block and
> firewall.
> The 4 strap is an unusual shape with two holes and a T shaped end.
> On a 65 BJ8, how should the strap be attached?
> To which hose?
> How are the two holes used?
> One hole must accept the T-shaped end. Whats the other one for?
> Thanks for your help.
> Charlie Frazer
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|