healeys
[Top] [All Lists]

Re: [Healeys] Rear End Shimmy

To: "'david porter'" <frogeye@swcp.com>
Subject: Re: [Healeys] Rear End Shimmy
From: "Ned Smith" <smithn00@kitepilot.net>
Date: Wed, 27 Jun 2007 10:45:27 -0400
In my case the splines were worn and sloppy. The shaft had to re-splined? at
a cost of around $200.00

Ned Smith
62 Tbird HT
67 Austin-Healey BJ8
near Chattanooga, TN
N34.89, W85.47

-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of david porter
Sent: Tuesday, June 26, 2007 7:03 PM
To: 'Mark and Kathy'; healeys@autox.team.net
Subject: Re: [Healeys] Rear End Shimmy

The drive shaft is two pieces, the slider and longer distance shaft (or what
ever others call them). They are joined by a splined shaft which has
indicator arrows or pointers which must be aligned with one another.  Else
the universals are "out of time" with one another and will cause a
noticeable vibration.
Dave

10:07 AM
_______________________________________________

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

<Prev in Thread] Current Thread [Next in Thread>